Irrigation & Watering
Garden irrigation systems | Hose fittings | Water-saving solutions for Eltham & beyond
Keep your garden thriving with our full range of Irrigation & Watering supplies—designed for efficient, reliable water management across all garden sizes. Whether you're installing a new drip system, replacing worn-out hose fittings, or looking for water-saving solutions, we’ve got everything you need to make watering simple and effective.
Our selection includes quality hoses, spray guns, tap timers, sprinklers, poly fittings, drippers, and more—trusted by home gardeners, landscapers, and tradies throughout Eltham, Research, Diamond Creek, and surrounding areas.
Sort by:
160 products
160 products
12mm Brass Hose Joiner
Connect or repair hoses | Heavy-duty brass construction | Simple, secure fit
The 12mm Brass Hose Joiner is designed for connecting two garden hoses together or for repairing a damaged section of hose. Made from solid brass, it offers excellent durability and a secure grip, ensuring long-lasting performance in everyday garden watering.
Compatible with standard 12mm garden hoses, this joiner is ideal for extending hose length or restoring damaged hoses to full use.
Ideal for:
- Repairing split or damaged hoses
- Extending existing hose length
- Everyday home garden and landscaping watering
- Reliable, long-term outdoor hose connections
Key Features:
✅ Suits 12mm (½”) garden hoses
✅ Heavy-duty solid brass construction
✅ Allows quick hose extension or repair
✅ Secure, leak-resistant connection
✅ For outdoor use with cold water only
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
12mm Plastic Quick Connect 3-Way Male Connector
Split one hose into two outlets | Quick snap-on fitting | Easy accessory changeover
The 12mm Plastic Quick Connect 3-Way Male Connector allows you to connect two hose-end accessories from a single 12mm garden hose connection. Ideal for running a sprinkler and hand spray at the same time — or connecting two irrigation zones from one supply point.
Designed to suit standard 12mm garden hose systems, each outlet features a quick snap-on male connector for fast, leak-resistant accessory changeover.
Ideal for:
- Running two sprinklers from one hose
- Connecting hose nozzles + irrigation setups
- Garden beds, lawns & veggie patch combinations
- General home garden watering flexibility
Key Features:
✅ Splits one hose to two outlets
✅ Fits standard 12mm garden hose systems
✅ Quick snap-on connection for fast swaps
✅ Durable, weather-resistant plastic construction
✅ Lightweight, rust-proof and UV-stable
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
12mm Plastic Y Tap Manifold (with Shut-Off Valves)
Run two hoses from one tap | Individual flow control | Easy snap-on garden connection
The 12mm Plastic Y Tap Manifold allows you to split your garden tap into two separate hose lines, each with its own independent shut-off valve. Perfect for running a sprinkler on one side and a hand spray or irrigation line on the other — without needing to disconnect anything.
Designed for standard 12mm hose systems, it features quick-connect outlets for convenient, leak-resistant hose attachment.
Ideal for:
- Running two watering zones from one tap
- Garden beds + lawn watering at the same time
- Connecting drip irrigation and a hose spray together
- Homes, courtyards, decks & raised bed setups
Key Features:
✅ Splits one tap into two hose outlets
✅ Individual on/off flow control for each outlet
✅ Fits standard 12mm garden hose fittings
✅ Durable, lightweight and rust-proof construction
✅ Easy snap-on connection — no tools required
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Flexible riser solution | Available in multiple lengths | Ideal for spray & pop-up installations
The 15mm Poly Riser by HR Products provides a dependable connection between underground pipework and sprinklers, jets or garden irrigation fittings. Available in multiple lengths (50 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 450 mm, 600 mm, 750 mm, 1000 mm, 1200 mm), you can select the exact height needed to suit your soil depth and fixture location.
Made from UV-stabilised low-density polyethylene (LDPE) and featuring male BSP threads, these risers are compatible with standard irrigation adaptors and pop-up units. Their robust yet flexible construction allows for simple installation and reliable performance in garden environments.
Ideal for:
- Raising pop-up sprinklers to correct finished-surface height
- Installing fixed shrub jets or border sprays that require set elevation
- Landscapes where finished ground level varies and custom riser height is needed
- DIY irrigation setups and professional landscape irrigation systems
Key Features:
✅ Wide range of lengths (50 mm to 1200 mm) to match soil depth and fixture height requirements.
✅ Compatible with standard 15 mm BSP male threaded irrigation fittings and adaptors.
✅ UV-resistant LDPE construction for durability in exposed outdoor conditions.
✅ Lightweight and easy to cut or trim on-site for custom riser heights.
Available in-store or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
15mm Plastic Impact Full/Part Circle Sprinkler (complete with 3.5mm Nozzle)
$10.95
Unit price per15mm Plastic Impact Full/Part Circle Sprinkler (complete with 3.5mm Nozzle)
$10.95
Unit price per15mm Plastic Impact Sprinkler – Full/Part Circle (3.5mm Nozzle)
Adjustable arc & throw | Medium–large lawn coverage | Reliable 15mm BSP connection
This 15mm Plastic Impact Sprinkler is a versatile full/part circle sprinkler designed to efficiently water medium to large lawn areas. Fitted with a 3.5mm nozzle and a 15mm BSP male inlet, it installs easily onto sprinkler bases, risers or tripod mounts.
With an adjustable arc from 30° to 360°, you can water a specific zone or rotate for full-circle coverage. The distance can be reduced to around 40% of maximum with a simple thumb-nut adjustment, giving you full control over watering range. The diffuser screw allows you to fine-tune droplet size and spray softness for even coverage.
Ideal for:
- Lawns & turf areas
- Newly planted grass
- Medium to large garden spaces
- Sprinkler bases, risers & tripod sprinklers
Key Features:
✅ Full or part circle adjustment (30°–360°)
✅ Radius control from approx. 4.5–13.5m (site pressure dependent)
✅ Diffuser screw for spray pattern fineness
✅ 15mm BSP male inlet suits sprinkler bases and risers
✅ Anti-splashback body design keeps water where it's needed
✅ Durable plastic and stainless components for outdoor use
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
15mm Zinc Impact Sprinkler – Full/Part Circle (with 3.0mm Nozzle)
Adjustable coverage | Durable metal construction | Suitable for bases, spikes & risers
This 15mm Zinc Impact Sprinkler is a reliable and economical option for watering lawns, garden areas and open landscapes. It features full or part-circle adjustment, allowing you to tailor the spray pattern to suit your space. The included 3.0mm nozzle ensures strong, even coverage.
Built from diecast metal, brass and stainless steel, this sprinkler is made for long-term outdoor performance.
The 15mm (½" BSP) male thread allows easy mounting to a sprinkler spike, riser or sled base.
Ideal for:
- Lawn and turf watering
- Newly seeded lawns or garden beds
- Rotational or portable sprinkler setups
- Landscapers, homeowners & acreage watering
Key Features:
✅ Adjustable full or part-circle spray pattern
✅ 3.0mm nozzle included for consistent water distribution
✅ Durable zinc, brass and stainless steel construction
✅ 15mm (½" BSP) male thread suits bases, spikes & risers
✅ Strong, dependable performance and easy setup
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
18mm Brass Hose Connector with Flow Stop
Quick-connect fitting | Built-in flow stop valve | Durable solid brass construction
The 18mm Brass Hose Connector with Flow Stop makes swapping hose-end accessories fast and simple — without needing to turn off the tap. The internal flow-stop valve automatically shuts off water when you disconnect a nozzle, wand or sprinkler, preventing water wastage and mess.
Made from high-quality brass, this connector is designed for long-lasting performance in Australian garden conditions.
Ideal for:
- Quickly swapping between sprayers, sprinklers or watering wands
- High-flow garden hose systems (18mm)
- Reducing water waste when changing attachments
- Everyday home and landscape watering setups
Key Features:
✅ Suits 18mm garden hoses
✅ Flow stop valve shuts off water when an accessory is removed
✅ Solid brass construction for long outdoor durability
✅ Quick-connect design for easy attachment & release
✅ For outdoor use with cold water only
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
18mm Brass Quick Connect Adaptor
Fast hose connection | Durable brass construction | Suits 18mm garden hoses
The 18mm Brass Quick Connect Adaptor allows you to easily attach and detach hose-end accessories such as sprayers, sprinklers and watering wands. Designed for 18mm garden hoses, this adaptor provides a secure and leak-resistant connection — making it ideal for high-flow watering setups.
Constructed from solid brass, it offers long-term durability and reliable performance in outdoor conditions.
Ideal for:
- Attaching hose nozzles, wands & sprinklers
- High-flow garden hose systems
- Quick swapping between watering accessories
- Everyday home and landscape watering
Key Features:
✅ Suits 18mm garden hoses
✅ Solid brass construction for long outdoor life
✅ Quick-connect design for fast swap between hose-end tools
✅ Provides a secure, leak-resistant fit
✅ For cold water outdoor irrigation use only
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Orbit Brass Tap Manifold – 2-Port & 4-Port
Solid brass construction | Individual shut-off levers | Expand one tap into multiple outlets
The Orbit Brass Tap Manifold allows you to run multiple garden hoses or irrigation lines from a single outdoor garden tap. Available in 2-port and 4-port designs, each outlet has its own on/off lever, giving you full control over which lines are operating at any time.
Made from durable solid brass, these manifolds are built to withstand outdoor conditions and frequent use — perfect for gardens, lawns, veggie patches, sprinkler systems and drip irrigation setups.
Ideal for:
- Running multiple hoses or irrigation zones from one tap
- Connecting garden beds, lawns and drip systems without swapping hoses
- Home gardens, courtyards, veggie patches and landscape watering
- Reducing tap wear by leaving fittings connected permanently
Key Features:
✅ Available in 2-Port and 4-Port models
✅ Solid brass body for durability and long service life
✅ Individual flow control levers for each outlet
✅ Standard 20mm (¾”) garden tap thread fits most outdoor taps
✅ Suitable for hose connectors, sprinklers and irrigation systems
Available in-store for pickup or local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Required back-flow protection | Female BSP threads both ends | AS/NZS compliant
The 25 mm Dual Check Valve is an essential component for irrigation and potable-water systems where back-flow prevention is required. With female BSP threads on both ends, this valve offers a straightforward inline installation between your water supply and your irrigation system or connection point. Dual independent check mechanisms mean the valve guards against both back-pressure and back-siphonage, helping protect the potable water supply from contamination.
Ideal for:
- Mains water feed into irrigation systems
- Rain-water tank connections or first-flush systems
- Domestic meter connections where low-hazard back-flow protection is required
- Residential and light commercial irrigation installations
Key Features:
✅ Female 25 mm BSP threads on both inlet and outlet for easy inline replacement.
✅ Certified to AS/NZS 2845.1 for low-hazard water supply protection.
✅ Durable brass/bronze body construction for long-term outdoor performance.
✅ Compact and suitable for vertical or horizontal installation—flexible application.
Available for in-store pickup or local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Threaded conversion fitting | 25mm BSP male to 25mm BSP female | O-ring sealed for fault-free installation
The 25mm Manifold Adaptor (BSP Male × Female) from HR Products is designed for seamless integration between threaded irrigation manifolds and standard BSP-threaded valves or fittings. With a male 25mm BSP thread on one end and a female 25mm BSP thread on the other, this adaptor acts as the bridge between your manifold system and downstream components — in simple, reliable form. According to the manufacturer’s specification sheet, this fitting is rated for up to 800kPa working pressure and incorporates pre-assembled O-ring seals for tool-free installation.
Ideal for:
- Connecting a 25mm BSP manifold to a solenoid valve or pipe fitting
- Upgrading or retrofitting irrigation valve banks where thread conversion is needed
- Use in garden irrigation systems where secure, tool-free connection is preferred
- Situations requiring reliable pressure-rated connections without glue or thread-tape
Key Features:
✅ 25mm BSP male to 25mm BSP female thread configuration
✅ Pre-assembled elastomeric O-ring seal (NBR)
✅ PVC construction rated for cold-water irrigation use up to 800kPa
✅ Hand-tighten installation with pivoting swivel ports allowing easy service access and maintenance.
Available for in-store pickup or local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Reliable seal | Female 25 mm BSP thread | Durable poly body for irrigation manifolds
The 25 mm Manifold Cap BSP is designed to neatly terminate the end of a 25 mm BSP-threaded irrigation manifold, providing a watertight closure and flexible service access. It features a female 25 mm BSP thread for direct screw-on installation, an O-ring seal for positive leak protection, and a UV-treated polypropylene body built to handle outdoor irrigation environments.
Ideal for:
- Sealing the end of a 25 mm irrigation manifold run
- Garden irrigation systems with BSP-threaded manifolds or solenoid valve assemblies
- Trade or DIY irrigation installations where a reliable end-cap is needed
- Projects where UV-resistance and long-term outdoor use matter
Key Features:
✅ Female 25 mm BSP thread for easy screw-on installation without adapters.
✅ O-ring sealed connection – dependable leak prevention, no thread tape required.
✅ UV-treated polypropylene construction – outdoor durable and resistant to weathering.
✅ Octagon-head shape allows tightening with pliers or multigrip tools for secure fit.
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Four-way irrigation manifold fitting | Female BSP connections | O-ring sealed for leak-free installation
The 25 mm Manifold Cross BSP is a versatile irrigation fitting designed to distribute water from a single inlet to three outlet lines in any landscape watering system. Molded from durable PVC with pre-assembled O-ring seals, this cross allows for quick-assembly of 25 mm BSP threaded valve banks - ideal for solenoid manifolds or multi-zone irrigation setups.
With its BSP-threaded female ports and robust build, this fitting simplifies manifold layout, accommodates multiple outlet lines, and supports efficient servicing of irrigation systems. The spec indicates standard working pressure up to 800 kPa for the HR Products manifold range.
Ideal for:
- Setting up irrigation valve banks with multiple zones
- Branching a 25 mm BSP supply line into three separate valve runs
- Residential or light commercial irrigation installs needing tidy manifold configurations
- Installations where easy servicing and reliable connections matter
Key Features:
✅ 25 mm BSP female threaded ports for straightforward integration with standard irrigation solenoid valves and fittings
✅ Pre-assembled O-ring seal ensures tool-free, leak-resistant installation with minimal joint tape or solvent.
✅ High-quality PVC construction rated to ~800 kPa working pressure - built for garden and landscape use
✅ Compact cross layout enables multi-outlet configuration while keeping manifold box footprint minimal
Available for pickup in-store or local delivery across Eltham, Research, Diamond Creek, and surrounding suburbs.
Durable multi-port irrigation fitting | High-flow elbow design | BSP-threaded ports
This Rain 25 mm Manifold Elbow BSP is designed to join or redirect a 25 mm BSP threaded irrigation manifold with precision and reliability. Available in both Male (25 mm M × 25 mm F) and Female (25 mm F × 25 mm F) variants, it gives you flexibility depending on how your valve box or manifold run is configured. According to the manufacturer spec sheet, these fittings are rated to a working pressure of up to 800 kPa.
Built from PVC with O-ring sealed swivel connections, the Rain manifold elbow enables tool-free assembly, no thread tape or glue required, and simplifies servicing of valve banks.
Ideal for:
- Routing a 25 mm BSP manifold line to a bank of solenoid valves in a valve box
- Redirecting or branching irrigation manifold runs under decks, in boxes or along walls
- Installations or upgrades where rapid service access and leak-free joints are needed
- Landscapes needing reliable manifold plumbing for multi-zone irrigation
Key Features:
✅ 25 mm BSP thread ports (Male × Female & Female × Female options) for flexible manifold layout
✅ O-ring sealed swivel connection means no tools, no tape, and fast servicing.
✅ PVC construction rated to 800 kPa – designed for cold-water irrigation systems.
✅ Ideal for spaces where manifold configuration needs a compact elbow rather than tee or cross
Available for in-store pickup or local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Quick-connect fitting | 25 mm BSP male thread | O-ring sealed for leak-free manifold assembly
The 25 mm Manifold Nipple (BSP) is designed to connect your irrigation manifold or solenoid valve bank securely and efficiently. Featuring 25 mm BSP male threads and a high-quality encapsulated O-ring seal, this fitting offers a leak-free connection without the need for thread tape.
Manufactured from durable, UV-resistant materials, it’s suitable for both wall-mounted and enclosed valve-box installations. With pressure ratings up to around 1000 kPa, it’s ideal for most garden irrigation systems.
Ideal for:
- Attaching solenoid valves to 25 mm BSP-threaded manifolds
- Completing irrigation manifold runs and valve boxes
- Residential and light-commercial irrigation installations
- Upgrades or expansions of existing manifold configurations
Key Features:
✅ 25 mm BSP male threads for direct screw-in to manifold or valve assemblies
✅ Encapsulated O-ring seal, providing reliable, tool-tight, leak-free installations
✅ UV-resistant construction — built to last outdoors without degradation
✅ Rated for approx. 1000 kPa working pressure making it suitable for typical irrigation systems
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Easy-service “jar-top” design | In-line valve | 24 V AC or 12 V DC solenoid
The Orbit Jar Top Solenoid Valve offers reliable automated zone control for sprinkler and drip systems. Featuring a convenient screw-top lid (the “jar top”), the internal diaphragm and components can be serviced easily without removing the valve body.
With a robust PVC body, built-in scrub-filter and bleed lever for manual flushing, this valve is designed for garden and landscape irrigation systems—ideal for both residential tasks and light commercial zones.
Ideal for:
- Installing a timed irrigation zone with compatibility to standard controllers
- Replacing or upgrading existing solenoid valves in garden or turf systems
- Use in systems requiring quick access and easy servicing
- Applications where valve shut-off is controlled via 24 V AC or 12 V DC solenoids
Key Features:
✅ Jar-top lid design offers no-tools access to valve internals.
✅ Manual on/off lever for manual flushing or testing.
✅ Built in scrub-filter to protect against debris and promote reliability.
✅ Compatible with 24 V AC solenoid systems (and 12 V DC variant) for versatile setups.
✅ Threaded in-line design (e.g., 1″ male threaded version available) for straightforward integration.
Available in-store or via local delivery across Eltham, Research, Diamond Creek, and surrounding suburbs.
3-Arm Metal Rotary Sprinkler
Gentle rotating spray | Even full-circle coverage | Durable metal construction
The 3-Arm Metal Rotary Sprinkler provides soft, even water distribution, making it ideal for lawns, garden beds, shrubs and flower areas. The rotating arms create a full-circle spray of consistent droplets, delivering thorough coverage without damaging delicate foliage.
Featuring adjustable spray nozzles, you can control both flow rate and watering diameter for efficient and targeted irrigation. The wheeled metal base allows for easy positioning and movement around the garden.
Ideal for:
- Lawns & turf areas
- Flower and shrub beds
- Courtyard and landscaped gardens
- Gentle watering where spray quality matters
Key Features:
✅ Full-circle rotating spray for even coverage
✅ Gentle watering — won’t damage flowers or new plantings
✅ Adjustable nozzles to vary spray strength and diameter
✅ Wheeled base for easy relocation
✅ Durable metal construction with corrosion-resistant finish
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Precision micro-irrigation fittings | Barbed 4 mm connection | Ideal for low-pressure garden systems
Our 4 mm Micro Poly Fittings—available as Joiners, Elbows and Tees —are designed for use with 4 mm ID micro tubing in low-pressure irrigation applications. Manufactured by Antelco and stocked by HR Products, these fittings feature UV-stabilised materials, barbed tails for secure connection and are suited for micro-drip zones, garden beds, tubs, greenhouse setups and more.
Whether you’re branching a micro line with a tee, creating a bend with an elbow, or simply joining two lengths of micro-tube, these fittings provide a cost-effective, reliable solution for home gardens, landscaping and horticultural irrigation.
Ideal for:
- Micro-tube irrigation systems in garden beds, tubs & planters
- Low-pressure driplines or micro-spray networks
- Retrofits or expansions of existing garden micro-irrigation lines
- Situations where precision watering and small-diameter tubing are required
Key Features:
✅ Available in three types: Joiner, Elbow & Tee — all for 4 mm tubing
✅ Barbed tail design ensures secure insertion into micro-tube with minimal leakage
✅ UV-stabilised plastics suitable for outdoor garden/environmental exposure
✅ Designed for low-pressure irrigation applications (typical garden micro-systems)
Available in-store or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
4mm Flexible Riser Tube – 10m & 30m
Soft micro irrigation tubing | Flexible & kink-resistant | Ideal for micro-sprays & drippers
This 4mm Flexible Riser Tube is commonly used to run micro-sprays, button drippers and emitters from a main irrigation supply line. Its soft, kink-resistant design makes it easy to route through garden beds, pots or raised veggie planters — even around curves and tight spaces.
Available in 10m and 30m roll lengths to suit small home garden setups or larger landscaping installs.
Ideal for:
- Running micro-sprays and drippers from 13mm or 19mm poly pipe
- Veggie garden beds, ornamental borders and potted plants
- Lightweight, flexible irrigation layouts that require frequent adjustment
- DIY garden watering or landscape irrigation installations
Key Features:
✅ Suitable for use with barbed 4mm micro fittings
✅ Flexible and kink-resistant for neat pipe routing
✅ UV-stabilised for long-term outdoor durability
✅ Available in 10m and 30m rolls to suit project size
✅ Easy to cut and connect — no special tools required
Available in-store for pickup or via local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Precision-moulded PVC | Smooth water flow | Range of bend angles for every layout
Our 90 mm Stormwater PVC Bends are designed to provide smooth directional changes in stormwater systems. Available in 15°, 22°, 45° and 90° variants, these fittings allow for flexible pipe routing around obstacles, garden edges, retaining walls, and underground structures — ensuring optimal flow and minimal turbulence throughout your drainage network.
Manufactured from high-quality PVC-U and built to AS/NZS 1254 standards, these bends are strong, lightweight, and resistant to corrosion and impact. Each bend features a female-to-female slip socket for quick installation with solvent cement, ensuring watertight performance for years to come.
Ideal for:
- Changing direction of 90 mm stormwater pipe runs
- Residential and light-commercial drainage systems
- Retrofitting or upgrading existing underground networks
- Above-ground or below-ground installation
Key Features:
✅ Available in 15°, 22°, 45° and 90° angles to suit every application
✅ Smooth internal bore design reduces friction and blockage risk
✅ Durable PVC-U construction – lightweight, corrosion-resistant and long-lasting
✅ Compatible with standard 90 mm stormwater fittings and pipe systems
✅ Complies with AS/NZS 1254 for stormwater and drainage use
Available in-store or via local delivery across Eltham, Research, Diamond Creek, and nearby suburbs.
Smooth branch connection | Robotic-grade PVC-U | Reliable stormwater routing
The 90 mm Stormwater Y Junction 45° is a Y-shaped chamber designed to smoothly divert stormwater pipes at a 45° angle, helping your drainage layout remain efficient and clean-flowing. Manufactured in rigid PVC-U and compliant with Australian standards for stormwater systems.
Whether you’re splitting a 90 mm trunk pipe to two exits, creating a bypass or forming a tidy junction beneath paved or landscaped areas, this fitting offers a practical, durable solution for both new builds and retrofit jobs.
Ideal for:
- Branching 90 mm stormwater runs into secondary lines
- Drainage under driveways, paths and paved gardens
- Residential and light commercial stormwater drainage systems
- Replacement or upgrade of existing down-pipe junctions
Key Features:
✅ Female-to-female slip sockets for straight insertion and solvent-cement installation.
✅ Rigid PVC-U construction — durable, impact-resistant and long-lasting.
✅ 45° branch angle provides smooth flow, reduces turbulence and blockages.
✅ Suitable for above-ground and below-ground installations and compliant with AS/NZS 1254 standard (where applicable).
Available for in-store pickup or local delivery across Eltham, Research, Diamond Creek and surrounding suburbs.
Showing 25/160
FEATURED PRODUCTS
WE THINK YOU WILL LOVE
Related blog posts
